Description
AmpVault SafePoint Digital EV Charging Protection Device – 6A Variant
AmpVault SafePoint Digital EV Charging Protection Device – 6A Variant is an intelligent, plug-and-play EV charging protection device designed for electric scooters and electric two-wheelers using compatible 6A Type-D charger plugs. It provides an additional layer of electrical protection against over-voltage, under-voltage, and excessive-current conditions during everyday EV charging.
Unlike conventional EV charging extension boards, AmpVault SafePoint Digital continuously monitors the incoming electrical supply and automatically disconnects power when specified voltage or current protection limits are reached. With a 10-second start-up delay, automatic recovery, FRLS wiring, dual earthing terminals, and a rugged powder-coated metal enclosure, it offers a practical solution for safer electric scooter charging at homes, apartments, garages, and sheltered parking areas.
Built with premium Anchor 1.5 sq.mm three-core copper cable and an ISI-certified Anchor 6A plug top, this digital EV charging safety device is available in multiple cable lengths to accommodate different charging locations.
Important: This variant is intended for compatible compact 6A Type-D EV charger plugs and has a maximum rated load of 10A. It is not suitable for large 16A charger plugs. This device provides digital voltage and current protection but does not include dedicated surge protection.
Important Compatibility Notice
AmpVault SafePoint Digital 6A is designed for electric scooter chargers equipped with compact Indian 6A Type-D plugs. It may be compatible with suitable chargers used by electric scooter brands such as Ather, TVS, Bajaj, Hero, Ampere, Okinawa, Zelio, and similar electric two-wheelers.
Compatibility depends on your charger’s actual plug type, electrical rating, and charging requirements. Not all chargers supplied with a particular electric scooter brand use the same plug configuration.
If your EV charger uses a large 16A plug, choose a suitable AmpVault SafePoint 16A variant instead.
Key Features
Digital Over-Voltage Protection – 270V Cut-Off
The integrated digital protection system monitors the incoming voltage and automatically disconnects power when the voltage reaches or exceeds 270V. This helps reduce exposure of compatible EV charging equipment to abnormal high-voltage conditions.
Digital Under-Voltage Protection – 170V Cut-Off
Automatically disconnects the electrical supply when the input voltage falls to 170V or below. This protection feature helps prevent continued charging during excessively low-voltage conditions.
Automatic Over-Current Protection – 15A Cut-Off Threshold
The digital current-monitoring system disconnects the power supply when the current reaches the specified 15A protection threshold. The device has a maximum rated operating load of 10A; the 15A protection threshold is not its continuous operating rating.
10-Second Start-Up Delay
Features an approximately 10-second delay before supplying power during start-up. This controlled delay helps prevent immediate energization of the connected charger when the device is switched on.
Automatic Power Recovery
After a protection cut-off, the device automatically restores power when electrical conditions return to an acceptable operating range, following an approximately 10-second recovery delay. This helps avoid immediate reconnection during unstable supply conditions.
Continuous Digital Voltage and Current Monitoring
The integrated digital monitoring system continuously checks incoming electrical conditions and responds automatically when configured voltage or current protection thresholds are reached.
Designed for 6A Type-D EV Charger Plugs
Equipped with a compact 6A Type-D socket designed for compatible electric scooter chargers. It is suitable for selected electric two-wheeler charging applications that match the device’s electrical specifications.
Powder-Coated Metal Enclosure
Features a rugged powder-coated metal enclosure designed for durability and protection of internal electrical components during normal use. Its compact construction makes it suitable for sheltered residential charging areas.
FRLS Wiring and Dual Earthing
Built with Flame Retardant Low Smoke (FRLS) internal wiring and dual earthing terminals. These components support the device’s electrical safety design when connected to a properly earthed and suitably rated electrical supply.
Premium Anchor 1.5 sq.mm 3-Core Copper Cable
Supplied with a pre-assembled Anchor 1.5 sq.mm three-core copper cable, designed to provide reliable electrical connectivity for compatible EV charging loads.
ISI-Certified Anchor 6A Plug Top
Comes with an Anchor 6A plug top, specified as ISI-certified, for connection to a compatible Indian electrical socket. Always use the device within its rated electrical specifications.
Plug-and-Play Operation
No internal assembly or wiring modification is required for ordinary plug-and-play use. Simply connect the SafePoint device to a suitable, properly earthed power outlet and insert your compatible EV charger plug into its dedicated socket.
Multiple Cable Length Options
Available in 1 meter, 2 meters, 3 meters, 5 meters, 7 meters, 10 meters, 15 meters, and 20 meters. Choose the appropriate cable length according to your charging location and approved electrical installation requirements.
Made in India with Manufacturer Warranty
Manufactured by Ampvault Technologies (OPC) Private Limited, India, and supplied with a 1-year manufacturer warranty.
How Does AmpVault SafePoint Digital EV Charging Protection Work?
AmpVault SafePoint Digital operates between a compatible electrical power source and an electric scooter charger. Its integrated digital monitoring system checks the incoming voltage and current and automatically disconnects the power supply when specified protection limits are reached.
- Connect to Power: Plug the AmpVault SafePoint device into a suitable, properly earthed electrical socket.
- Connect Your EV Charger: Insert your compatible 6A Type-D electric scooter charger plug into the SafePoint outlet.
- Start-Up Delay: The device applies an approximately 10-second delay before supplying power under acceptable operating conditions.
- Continuous Monitoring: The digital protection system monitors incoming voltage and current during operation.
- Automatic Cut-Off: Power is disconnected when the specified over-voltage, under-voltage, or over-current protection thresholds are reached.
- Automatic Recovery: Once electrical conditions return to an acceptable operating range, the device waits approximately 10 seconds before restoring power, provided the protection conditions permit reconnection.
This automated protection system helps reduce manual intervention following qualifying electrical interruptions. Whether charging resumes automatically after power restoration depends on the connected EV charger’s own operating behaviour.
Digital EV Charging Protection Specifications
| Protection Feature | Protection Setting |
|---|---|
| Over-Voltage Protection | Automatic cut-off at 270V or above |
| Under-Voltage Protection | Automatic cut-off at 170V or below |
| Over-Current Protection | Specified cut-off threshold at 15A |
| Maximum Rated Load | 10A |
| Start-Up Delay | Approximately 10 seconds |
| Automatic Recovery Delay | Approximately 10 seconds after acceptable supply conditions return |
| Electrical Monitoring | Digital voltage and current monitoring |
| Surge Protection | Not included |
| Protection Function | Automatic voltage and current cut-off |
Suitable For
- Electric scooters with compatible 6A Type-D charger plugs
- Electric two-wheelers using compatible compact Indian Type-D charger plugs
- Selected Ather electric scooter chargers
- Selected TVS iQube electric scooter chargers
- Selected Bajaj Chetak electric scooter chargers
- Selected Hero electric scooter chargers
- Selected Ampere electric scooter chargers
- Selected Okinawa electric scooter chargers
- Selected Zelio electric scooter chargers
- Home electric scooter charging
- Apartment EV charging arrangements
- Residential parking-space charging
- Sheltered basement charging areas
- Garage electric two-wheeler charging
- Charging locations requiring compatible extended cable lengths
Compatibility Note: References to electric scooter brands indicate potential applications only and do not imply universal compatibility or official endorsement. Always verify your charger plug type, electrical rating, and compatibility before purchasing.
Not Suitable For
- Large 16A EV charger plugs
- Chargers requiring a dedicated 16A socket
- PRCD or other oversized charger plugs that are physically incompatible
- EV chargers using plug types other than compatible 6A Type-D plugs
- Charging loads exceeding the device’s maximum rated load of 10A
- Electric car chargers requiring higher-current connections
- Industrial EV charging equipment
- Use with low-quality or unsuitable plug converters
- Damaged, loose, overloaded, or improperly earthed electrical outlets
- Direct exposure to rain, water splashes, or flooding without suitable weatherproof protection
- Applications requiring dedicated surge protection or earth-leakage protection not provided by this device
Important Safety Notice: AmpVault SafePoint Digital is an additional voltage and current protection device. It does not replace properly rated circuit protection, suitable electrical wiring, effective earthing, or other protection required for the installation. Always use the product with compatible electrical equipment and within its specified ratings.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | AmpVault SafePoint |
| Product Name | AmpVault SafePoint Digital EV Charging Protection Device |
| Product Type | Digital EV Charging Voltage and Current Protection Device |
| Model Number | AVSP-DEV10A |
| Manufacturer Part Number | AVSP-DEV10A |
| Variant | 6A Type-D EV Charger Plug Compatible |
| Socket Type | 6A Type-D Socket |
| Input Plug | Anchor 6A Plug Top |
| Number of Outlets | 1 |
| Input Voltage | 220V |
| Maximum Rated Current | 10A |
| Over-Voltage Cut-Off | 270V and above |
| Under-Voltage Cut-Off | 170V and below |
| Over-Current Cut-Off Threshold | 15A |
| Start-Up Delay | Approximately 10 seconds |
| Automatic Recovery | Yes, with approximately 10-second delay |
| Protection Functions | Over-Voltage, Under-Voltage, and Over-Current Cut-Off |
| Surge Protection | No |
| Internal Wiring | FRLS Wiring |
| Earthing | Dual Earthing Terminals |
| Cable Brand | Anchor |
| Cable Specification | 1.5 sq.mm, 3-Core Copper Cable |
| Cable Colour | White |
| Available Cable Lengths | 1m, 2m, 3m, 5m, 7m, 10m, 15m, 20m |
| Enclosure Material | Metal |
| Enclosure Finish | Powder-Coated |
| Product Dimensions | 6.5 x 11.5 x 15.5 cm (D x W x H) |
| Item Weight | 1 kg |
| Installation Type | Plug-and-Play |
| Application | Compatible Electric Scooter and EV Two-Wheeler Charging |
| Country of Origin | India |
| Manufacturer | Ampvault Technologies (OPC) Private Limited |
| Packer | Ampvault Technologies (OPC) Private Limited, Hyderabad, Telangana, India |
| Manufacturer Contact | contact@ampvault.in |
| Box Contents | 1 Digital EV Charging Protection Device with selected cable length and pre-assembled plug top |
| Warranty | 1 Year Manufacturer Warranty |
| ASIN Reference | B0HLT3XGZF |
Why Choose AmpVault SafePoint Digital for Electric Scooter Charging?
Electric scooter charging depends on a compatible and reliable electrical power supply. Abnormal electrical conditions, including excessively high voltage, low voltage, and excessive current, can affect connected EV charging equipment.
Unlike ordinary extension boards that simply provide an additional socket, AmpVault SafePoint Digital incorporates active digital voltage and current monitoring. When specified electrical protection limits are reached, the device automatically disconnects power to help reduce exposure to abnormal supply conditions.
Its automatic recovery functionality, quality electrical components, robust metal enclosure, and convenient cable length options make it a practical choice for electric scooter owners looking for additional electrical protection during everyday charging.
Whether charging in a home garage, apartment parking area, or sheltered residential charging space, AmpVault SafePoint Digital provides a compact and convenient way to incorporate automatic voltage and current cut-off protection into a compatible EV charging setup.
AmpVault – Energy Engineered, Safety Delivered.
Frequently Asked Questions
What is the AmpVault SafePoint Digital EV Charging Protection Device?
It is a digital voltage and current protection device designed for compatible electric scooter chargers using compact 6A Type-D plugs. It monitors electrical conditions and automatically disconnects power when specified protection thresholds are reached.
Does AmpVault SafePoint Digital protect against high and low voltage?
Yes. It provides over-voltage cut-off at 270V or above and under-voltage cut-off at 170V or below, according to the specified protection settings.
Does AmpVault SafePoint Digital provide over-current protection?
Yes. The device has a specified over-current cut-off threshold of 15A. Its maximum rated operating load is 10A, and it must not be used continuously above that rating.
Does the device automatically restart after a power cut-off?
The device automatically restores its output power after electrical conditions return to an acceptable operating range, following an approximately 10-second delay. Whether the EV charger resumes charging automatically depends on the charger’s own restart behaviour.
Can I use this device with Ather, TVS, Bajaj, Hero, or Ampere electric scooters?
It may be suitable for compatible chargers used by these brands when the charger has the required compact 6A Type-D plug and operates within the device’s electrical ratings. Always verify the actual charger specifications before purchasing.
Can AmpVault SafePoint Digital 6A be used with a 16A EV charger plug?
No. This variant is designed for compact 6A Type-D plugs and is not physically compatible with large 16A charger plugs.
Does AmpVault SafePoint Digital include surge protection?
No. This model provides digital over-voltage, under-voltage, and over-current cut-off functions. It does not include a dedicated surge protection function.
What happens when the voltage returns to normal?
When the electrical supply returns to an acceptable operating range, the device waits approximately 10 seconds before automatically restoring power, provided the relevant protection conditions permit reconnection.
Does the device require an electrician for installation?
No additional internal wiring or assembly is required for ordinary plug-and-play operation when a correctly rated, properly earthed, compatible electrical socket is already available. Any new socket installation or electrical modification should be carried out by a qualified electrician.
What cable lengths are available?
AmpVault SafePoint Digital is available with 1m, 2m, 3m, 5m, 7m, 10m, 15m, and 20m cable options, subject to product availability and the electrical suitability of the installation.
Is AmpVault SafePoint Digital suitable for apartment parking areas?
Yes, it can be used in sheltered apartment parking areas where a compatible, properly earthed, and suitably rated electrical supply is available and the EV charger meets the device’s specifications.
What is the warranty period?
AmpVault SafePoint Digital comes with a 1-year manufacturer warranty.
Is the AmpVault SafePoint Digital EV Charging Protection Device made in India?
Yes. The product is manufactured by Ampvault Technologies (OPC) Private Limited, India.
Choose the Right AmpVault SafePoint Digital Cable Length
AmpVault SafePoint Digital is available in multiple cable lengths to accommodate different electric scooter charging locations.
- 1 Meter: Suitable when the electrical power outlet is located close to the charging point.
- 2 Meters: A compact option for short-distance charging connections.
- 3 Meters: Suitable for residential charging arrangements requiring a little additional reach.
- 5 Meters: Useful for selected home garages and sheltered parking spaces.
- 7 Meters: Provides extended reach for suitable apartment parking arrangements.
- 10 Meters: Suitable for layouts requiring longer cable routing, subject to electrical suitability.
- 15 Meters: An extended cable option for approved charging configurations requiring additional distance.
- 20 Meters: The longest listed cable option, intended only for electrically suitable installations and compatible loads.
Choose a cable length based on the location of your power source, the charger’s electrical requirements, and the suitability of the overall electrical installation. Longer cable lengths should be assessed for voltage drop, heating, and safe current handling.
Safety and Usage Guidelines
- Use only with compatible 6A Type-D EV charger plugs.
- Do not exceed the device’s maximum rated load of 10A.
- Connect only to a suitable, properly earthed electrical supply.
- Do not use damaged, loose, or overheated plugs and sockets.
- Avoid unsuitable adapters, low-quality extension boards, and overloaded electrical circuits.
- Do not expose the device directly to water or rainfall without appropriate weatherproof protection.
- Keep the device away from standing water and excessive external heat sources.
- Do not open or modify the device’s internal electrical components.
- Use an appropriately rated electrical installation with the necessary upstream protection.
- If the device repeatedly disconnects power, investigate the electrical supply or connected charging equipment before continued use.
Disclaimer: AmpVault SafePoint Digital provides an additional layer of voltage and current cut-off protection. It does not replace proper earthing, suitable circuit breakers, residual-current protection where required, surge protection, or compliance with applicable electrical safety standards.
AmpVault SafePoint Digital – Intelligent Voltage and Current Protection for Compatible Electric Scooter Charging.
Reviews
There are no reviews yet.